Products

Dicaliant products aim at providing you the highest possible accuracy in your on-board impedance measurements. Three product categories are available:

– Dicaliant Digital Twin evaluation sets: for trying out the concept and proving the promise with your own test case, starting at 79 €

– Dicaliant Digital Twin pigtails: set of pigtails with de-embed models for regular R&D work

– ZAC-BOX calibration kits: if you don’t have a quality SMA cal kit, you can use Dicaliant ZAC-BOX one-port calibration kits which are configured to directly calibrate the pigtails that ship with the kit. ZAC-BOXes start at 1895 €.

If you work above 4 GHz, note that in matching circuit design the component models and the board layout play major role. Please check our blog article on challenges and solutions at high frequencies. If you feel uneasy, please consider ordering a training along with the calibration kit.

The ZAC-BOX calibration kits are available in three frequency classes:

ZAC-BOX 4 : 1895 €

for frequencies up to 4 GHz

ZAC-BOX 6 : 2095 €

for frequencies up to 6 GHz

ZAC-BOX 8.5 : 2495 €

for frequencies up to 8.5 GHz

All kits and accompanying pigtails are SMA-F (use M-M adapter at your VNA cable if necessary). The calibration standard models (short/open/load) are delivered by email.

The ZAC-BOXes ship with 16 pcs of individually characterized flexible pigtails (length: 75 mm, diameter: 0.81 mm or 1.13 mm). For 6 GHz and 8.5 GHz versions, due to accuracy requirement, each pigtail has a fine-tune model that can be applied directly on the VNA upon measurement. Fine-tune models are delivered with the calibration standard models. Compatible pigtails can be ordered after the initial set is spent. Each pigtail can typically be used 3 times.